ReeR – EOS4

ReeR – EOS4

İpucu 4 kompakt güvenlik ışıkları, SIL 3, SIL CL3, PL e, Kedi 4

EOS, rekabetçi performans ve yenilikçi özelliklerle kompakt bir ışık perdesi aralığıdır.

Statik çıkışların kendinden izlenmesi, harici kontaktörlerin kontrolü (EDM) ve otomatik / manuel seçilebilir yeniden başlatma da dahil olmak üzere entegre emniyet fonksiyonlarına sahip modelleri içerir.
Minimum kesit: 28 x 30 mm.
2 veya 3 perdenin basamak bağlantıları için Master / Slave modelleri.
Bir tarafta kör alan yok. İlk kirişin konumu hassas alanın ışık perdesinin sonuna kadar uzanmasını sağlar. Korunan alan, çözünürlüğünü koruyan ışık perdesi bitene kadar uzanır.
Konektör tarafında minimum kör alan. İki L-monte edilmiş ışık perdesi ile çözüm; Master / Slave, köşede 40 mm çözünürlük sağlar (40 mm’ye kadar çözünürlüklü modeller).

youtube
Safety level Type 4 according to EN 61496-1; IEC 61496-2
SIL 3 according to IEC 61508
SILCL 3 according to IEC 62061
PL e – Cat. 4 according to EN ISO 13849-1
Protected heights (mm) 160 … 2260
Response time (ms) 2,5 ms … 20 ms
Safety outputs 2 PNP – 400 mA at 24 VDC with short-circuit, overload, polarity reversal protection
Signalling LEDs for light curtain’s status and diagnostic
On the receivers of 14 mm resolution and H models a blue LED turns ON when the received beam signal intensity is weak.
Power supply (VDC) 24 ± 20%
Max. cable length 100 m
Operating temperature (°C) -30 … 55 – Standard models with range up to 12 m
-20 … 55 – H models with range up to 20 m
Protection rate IP 65 and IP 67
Fastening modes Back slot to the top and lower end by rotating brackets SFB E180 (optional)
Cross section (mm) 28 x 30
  • 2006/42/EC: Machine Directive
  • 2014/30/EU: Electromagnetic Compatibility Directive
  • 2014/35/EU: Low Voltage Directive
  • EN 61496-1:2013 (Type 4) Safety of machinery. Electro sensitive protective equipment. General requirements and tests
  • EN 61496-2:2013 (Type 4) Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • IEC 61508-1 (ed. 2) (SIL 3) Functional safety of electrical/electronic programmable electronic safety related systems. General requirements
  • IEC 61508-2 (ed. 2) (SIL 3) Functional safety of electrical/electronic/programmable electronic safety related systems. Requirements for electrical/electronic/programmable electronic safety-related systems
  • IEC 61508-3 (ed. 2) (SIL 3) Functional safety of electrical/electronic programmable electronic safety related systems. Software requirements
  • IEC 61508-4 (ed. 2) (SIL 3) Functional safety of electrical/electronic programmable electronic safety related systems. Definitions and abbreviations
  • IEC62061:2005/A2:2015 (SILCL 3) Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
  • EN ISO 13849-1:2015 (Cat. 4, PL e) Safety of machinery. Safety related parts of control systems. Part 1: General principles for design
  • UL (C+US) mark for USA and Canada
  • S-Mark for Korea
  • TS-Mark for Taiwan
  • ANSI / UL 1998: Safety Software in Programmable Components
  • EOS4 is the ideal choice for many industrial applications, including: food & beverage, packaging, pharmaceutics, printing, paper,logistics, metalworking, woodworking, chemicals, injection moduling and many more…
    • Presses
    • Punching and dinkingmachines
    • Cutters and shears
    • Robotised areas
    • Assembly lines
    • Assembly machines, also having a small size
EOS 4A

Otomatik Başlat / Yeniden Başlat

EOS4 AH

Otomatik Başlatma / Yeniden Başlatma ile yüksek menzilli modeller

EOS4 X

Dahili kontrol fonksiyonu ile

EOS4 XH

Dahili kontrol fonksiyonlu yüksek menzilli modeller

EOS4 XS - XM - XS2
Dahili kontrol fonksiyonlarına sahip Master / Slave modelleri
EOS4 AH EX

ATEX koruma muhafazalı EOS4 sürümü

EOS4 X WTF/WTHF - EOS4 XH WTF/WTHF

Sızdırmaz muhafaza, Yemekte Derecelendirilmiş, IP69K Onaylı

79 Ratio Agency