ReeR – JANUS

ReeR – JANUS

Tip 4, SIL3, SILCL3, PL e, Kat. Entegre Susturma fonksiyonlu 4 güvenlik ışık perdesi

Janus tip 4 güvenlik ışık perdeleri ailesi, özellikle güvenlik fonksiyonlarının yüksek seviyede entegrasyonunu gerektiren çok sayıda yüksek riskli endüstriyel uygulamaların korunması için ideal bir çözümdür.
Örneğin, Susturma işlevi bulunan modellerde, Janus, ışık perdesinin sistemin kontrol devrelerinden (genellikle korumalı kapıdan uzakta) bağımsızlığını ve gerektiğinde Söndürme sensörlerinin entegrasyonunu garanti eder.
Ana konektör aracılığıyla entegre olarak gerçekleştirilen her bir işlevin ayarları. Yazılım aracılığıyla yapılandırmaya gerek yok.

Safety level Type 4 according to EN 61496-1; IEC 61496-2
SIL 3 according to IEC 61508
SILCL 3 according to IEC 62061
PL e – Cat. 4 according to EN ISO 13849
Safety output 2 PNP auto-controlled – 500 mA at 24 VDC with short-circuit, overload, polarity reversal protection
Light curtain status indication
and weak signal output
PNP – 100 mA at 24 VDC
Signalling 7-segment display and LEDs for self-diagnosis and light curtain status
Start/Restart Selectable automatic or manual
External device monitoring Yes. External device monitoring feedback input with enabling, selectable
Power supply (VDC) 24 ± 20%
Max. length electrical connections (m) 100
Operating temperature (°C) -10 … 55
Protection rate IP 65
Cross-section (mm) 50 x 60
  • 2006/42/EC: Machine Directive
  • 2014/30/EU: Electromagnetic Compatibility Directive
  • 2014/35/EU: Low Voltage Directive
  • EN 61496-1:2013 Safety of machinery. Electro sensitive protective equipment. General requirements and tests
  • EN 61496-2:2013 Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • EN 61508-1:2010 (SIL 3) Functional safety of electrical/electronic programmable electronic safety related systems. General requirements
  • EN 61508-2:2010 (SIL 3) Functional safety of electrical/electronic/programmable electronic safety related systems. Requirements for electrical/electronic/programmable electronic safety-related systems
  • EN 61508-3:2010 (SIL 3) Functional safety of electrical/electronic programmable electronic safety related systems. Software requirements
  • EN 61508-4:2010 (SIL 3) Functional safety of electrical/electronic programmable electronic safety related systems. Definitions and abbreviations
  • EN 62061:2005/A2:2015 (SILCL 3) Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
  • EN ISO 13849-1:2015 (Cat. 4, PL e) Safety of machinery. Safety-related parts of control systems. Part 1: General principles for design
  • EN 50178:1997 Electronic equipment for use in power installations
  • EN 55022:2006 Information Technology Equipment. Radio Disturbance Characteristics. Limits and Methods of Measurement
  • UL (C+US) mark for USA and Canada
  • TS-Mark for Taiwan
  • ANSI / UL 1998: Safety Software in Programmable Components
  • Palletizers
  • Robotized areas
  • Assembly lines
  • Automatic industrial warehouses
  • Areas through which AGV automatically guided vehicles pass
  • Access control
  • Cutting machines
  • Robot-palletisers
  • Automatic punching machines
  • Shear lines

Muting applications

    • L Logic Crossed beams
      Suitable solution for any applications of pallet exit.
    • L Logic Parallel beams
      Suitable solution for transparent material: glass and bottling industry of pallet exit.
    • T Logic Crossed beams
      Suitable solution for the most common pallet infeed/outfeed applications. Ideal solution in case of a continuous flow of pallets even without separation between the pallets.
    • T Logic Parallel beams
      Suitable solution for transparent material and application with presence of a pallet with reduced width or not centred with respect to the conveyor. Through the verification of the 4 sensors, allows to set infinite muting time-out. Please note: this configuration needs a separation between two consecutive pallets equal to the distance between the two external muting sensors.
JANUS MI

Dahili Susturma işlevi modelleri

JANUS MI TRX/TRXL

Muting fonksiyonlu ve pasif retro-reflektör elemanlı modeller

JANUS ML

Yerleşik ön kablolu ve önceden hizalanmış fotoelektrik kesme sensörleri ile yatay kollu model

JANUS ML TRX

Muting fonksiyonları ve pasif retro-reflektör elemanı ile. Dahili önceden kablolu ve önceden hizalanan Susturucu sensörler ile yatay kollu model

JANUS MT

Yerleşik ön kablolu ve önceden hizalanmış fotoelektrik kesme sensörleri ile yatay kollu model

JANUS MT TRX

Muting fonksiyonları ve pasif retro-reflektör elemanı ile. Dahili önceden kablolu ve önceden hizalanan Susturucu sensörler ile yatay kollu model

JANUS MM TRX

Muting fonksiyonları ve pasif retro-reflektör elemanı

JANUS J

Yerleşik kontrol fonksiyonlarına sahip modeller

JANUS J LR - LR M12

Dahili kontrol fonksiyonlarına sahip uzun menzilli modeller

JANUS J LRH M12 - LRH M12 ILP

Dahili kontrol işlevlerine sahip uzun menzilli modeller – Entegre lazer pointer ile

JANUS J TRX / TRXL

Pasif reflektörlü elemanlı modeller

JANUS MT H

Yerleşik ön kablolu ve önceden hizalanmış fotoelektrik kesme sensörleri ile yatay kollu yüksek menzilli modeller

MUTING ARMS

Janus MI ve Janus MM ışık perdeleri için önceden kablolanmış ve önceden monte edilmiş susturucu kollar

79 Ratio Agency